The high-performance automatic spray gun A 14 essentially consists of two parts: the air control section and the fluid head section. The basic design of the gun is the same as that of the A 10 model; the main difference is that the A 14 is equipped with the HVLP (High Volume Low Pressure) nozzle system which ensures low-mist spraying operations under certain conditions. This is an additional further development of the A 12 HV1 spray gun designed to optimise spraying results. The head section can be removed from the control section by unscrewing just one screw. The control system is activated by a 3/2-way valve. When switching on, the compressed air-driven control piston first opens the spray air valve and then – a short time later – the material nozzle of the gun. During switch-off, the material nozzle is closed, and then the spray air valve. This control procedure ensures faster working and prevents material nozzle drip. The practical design of the A 14 makes it extremely repair-friendly and facilitates low maintenance and cleaning. The compact design and the low weight permit use of the A 14 under even the most unfavourable mounting conditions (e.g. in spraying machines and spraying robots). There are various options for material feed. Guns are available with a range of material connection hose nozzles as well as circulation connections. There is also a wide selection of nozzles and needles of different sizes. The spray gun can of course also be used in combination with our material feed containers, diaphragm pumps and regulators.